Discounted set EMP Battery 72V 50Ah(3600Wh) + KO Nano Controller max.17kW for Sur-Ron X/L1e

Description

• Discounted set EMP Battery 72V 50Ah + KO Nano Controller max.17kW for Sur-Ron X/L1e!

Description EMP Battery 72V 50Ah:

• Range of up to 120 km per charge with more powerful control.
• Increases the performance and top speed of the Sur-Ron X/L1e.
• Must be installed with a more powerful controller!
• The 72V battery cannot be connected to the factory controller!
• The continuous discharge current of the battery is 210 A, which provides a continuous output of 16 kW.
• The peak discharge current of the battery is 400 A.
• A more powerful 72V 12A charger must be purchased for the 72V battery, cannot be recharged with the factory Sur-Ron Light Bee charger!

Description:

• EMP Battery 72V 50Ah (3600 Wh) for Sur-Ron Light Bee X/L1e.
• The battery is made of Samsung 21700 battery cells.
• The battery is typically designed to replace the original Sur-Ron battery, with an integrated smart battery management system and Bluetooth functionality.
• Simply replace the 72V 50Ah battery with the original battery, no interference with the Sur-Ron frame is required!
• Lifetime: after 1000 full charge cycles, the battery capacity remains at 80% of new.
• The number of charging cycles of the batteries is counted to “full” cycles. So if you discharge the battery halfway and charge it again it is even less than half a cycle.
• Rated voltage 72 V
• Rated capacity 50 Ah
• With IP67 waterproof and dustproof housing.
• With LCD display to show battery SOC and special conditions.
• Application for BMS / ANT BMS: Download link

Type: 72V 50Ah (3600 Wh) Li Polymer Battery

• The battery pack is made of Samsung 21700 battery cells
• BMS: ANT-300A
• Maximum controller power: 17kW
• Rated voltage (V): 72V
• Capacity: 50Ah
• Battery charging current: 12 A (cannot be charged with the original charger)
• Dimensions: 15.8 x 14.1 x 37cm
• Warranty: 12 months

Temperature ranges for:

• Charging: 0~65°C
• Discharge: -20~75°C
• Storage: 0~40°C

Description of KO Nano Kontroleru 17kW:

• More powerful KO Nano controller (17kW) on Sur-Ron Light Bee X/L1e.
• Sur-Ron Light Bee power increase to 17kW.
• Easy control via app

• With a 60V battery, the Sur-Ron LIght Bee’s output can be increased to 12-14kW (peak output up to 19kW)
• With a 72V battery, the Sur-Ron Light Bee’s power output can be increased up to 17kW (peak output up to 23kW)

• Info:
• KO NANO controller on Sur-Ron Light Bee X/L1e.
• MAXIMUM POWER – 17kW
• Designed from the ground up to deliver unrivalled performance and power without suffering from all the problems that plague the current offering.
• Easy assembly
• The motor and controller are designed to be plugged into the Sur-Ron and used, and installation is easy because they use the same wiring as well as the same default Sur-Ron display unit. This eliminates the need to upgrade the display unit and run additional wiring throughout the bike.
• For a serial machine the increase is 1500W-2000W.
• Control unit specifications
• Easy control of the controller via the KO app on your phone.OPERATING VOLTAGE – 60-72 V nominal (max. voltage 84 V)
• MAX. PHASE CURRENT 450 A
• MAX. PROUD 210A
• MAXIMUM POWER – 17kW
• OPERATING TEMPERATURE – -25-80℃
• INGRESS PROTECTION – IP67
• MAXIMUM EFFICIENCY – ＞95%
• **NOTE* Please note that you must use the supplied screws when installing the controller to prevent damage to the controller. Using hex screws may result in too much torque on the connectors, which may be damaged or even broken off if too much force is applied. To prevent this, we supply Philips head screws with the controller.